Disassemble and Reassemble 3x3x3:

by: Caleb Lau

Introduction:
Just in case you don't know how to disasseble and reassemble your 3x3x3, I'll provide some instructions. With the method of disassembly provided here, you can safely take you cube (3x3x3) apart without damaging any of the internal parts. It's actually really easy to do. Ready. Okay, let's start. (Captions are below the pictures.)


Disassembly


The fully assembled cube.


Turn the top layer 45 degrees.


Use either a flat-head skrew driver or your finger to gently lift the edge piece out.


It should look like this.


Take the rest of the cube apart. This should be easy.

Assembly:


I assemble the same way I solve, layer-by-layer; Put a cross on the mechanism.


Put the bottom layer corners.


Put the middle layer edge pieces in place.


Turn the top layer 45 degrees and put an edge piece in.


Put the rest of the top layer pieces in. It should look like this.


Push in the last edge piece and you have a fully assembled cube.



Happy Cubing!

Page Up